Menu

Important: This documentation is about an older version. It's relevant only to the release noted, many of the features and functions have been updated or replaced. Please view the current version.

Enterprise Open source

Installing using Docker

Grafana is very easy to install and run using the official Docker container.

bash
$ docker run -d -p 3000:3000 grafana/grafana

Configuration

All options defined in conf/grafana.ini can be overridden using environment variables by using the syntax GF_<SectionName>_<KeyName>. For example:

bash
$ docker run -d \
  -p 3000:3000 \
  --name=grafana \
  -e "GF_SERVER_ROOT_URL=http://grafana.server.name" \
  -e "GF_SECURITY_ADMIN_PASSWORD=secret" \
  grafana/grafana

The back-end web server has a number of configuration options. Go to the Configuration page for details on all those options.

For any changes to conf/grafana.ini (or corresponding environment variables) to take effect you need to restart Grafana by restarting the Docker container.

Default paths

The following settings are hard-coded when launching the Grafana Docker container and can only be overridden using environment variables, not in conf/grafana.ini.

SettingDefault value
GF_PATHS_CONFIG/etc/grafana/grafana.ini
GF_PATHS_DATA/var/lib/grafana
GF_PATHS_HOME/usr/share/grafana
GF_PATHS_LOGS/var/log/grafana
GF_PATHS_PLUGINS/var/lib/grafana/plugins
GF_PATHS_PROVISIONING/etc/grafana/provisioning

Image Variants

The official Grafana Docker image comes in two variants.

grafana/grafana:<version>:

Note: This image was based on Ubuntu before version 6.4.0.

This is the default image. This image is based on the popular Alpine Linux project, available in the alpine official image. Alpine Linux is much smaller than most distribution base images, and thus leads to slimmer and more secure images.

This variant is highly recommended when security and final image size being as small as possible is desired. The main caveat to note is that it does use musl libc instead of glibc and friends, so certain software might run into issues depending on the depth of their libc requirements. However, most software doesn’t have an issue with this, so this variant is usually a very safe choice.

grafana/grafana:<version>-ubuntu:

Note: This image is available since version 6.5.0.

This image is based on Ubuntu, available in the ubuntu official image. This is an alternative image for those who prefer an Ubuntu based image and/or who are dependent on certain tooling not available for Alpine.

Running a specific version of Grafana

bash
# specify right tag, e.g. 6.5.0 - see Docker Hub for available tags
$ docker run -d -p 3000:3000 --name grafana grafana/grafana:6.5.0
# ubuntu based images available since Grafana 6.5.0
$ docker run -d -p 3000:3000 --name grafana grafana/grafana:6.5.0-ubuntu

Running the master branch

For every successful build of the master branch we update the grafana/grafana:master and grafana/grafana:master-ubuntu. Additionally, two new tags are created, grafana/grafana-dev:master-<commit hash> and grafana/grafana-dev:master-<commit hash>-ubuntu, which includes the hash of the git commit that was built. This means you can always get the latest version of Grafana.

When running Grafana master in production we strongly recommend that you use the grafana/grafana-dev:master-<commit hash> tag as that will guarantee that you use a specific version of Grafana instead of whatever was the most recent commit at the time.

For a list of available tags, check out grafana/grafana and grafana/grafana-dev.

Installing Grafana plugins

Pass the plugins you want installed to docker with the GF_INSTALL_PLUGINS environment variable as a comma separated list. This will pass each plugin name to grafana-cli plugins install ${plugin} and install them when Grafana starts.

bash
docker run -d \
  -p 3000:3000 \
  --name=grafana \
  -e "GF_INSTALL_PLUGINS=grafana-clock-panel,grafana-simple-json-datasource" \
  grafana/grafana

If you need to specify the version of a plugin, you can add it to the GF_INSTALL_PLUGINS environment variable. Otherwise, the latest will be assumed. For example: -e "GF_INSTALL_PLUGINS=grafana-clock-panel 1.0.1,grafana-simple-json-datasource 1.3.5"

Building a custom Grafana image

In the Grafana GitHub repository there is a folder called custom/ which two includes Dockerfiles, Dockerfile and ubuntu.Dockerfile, that can be used to build a custom Grafana image. It accepts GRAFANA_VERSION, GF_INSTALL_PLUGINS and GF_INSTALL_IMAGE_RENDERER_PLUGIN as build arguments.

With pre-installed plugins

If you need to specify the version of a plugin, you can add it to the GF_INSTALL_PLUGINS build argument. Otherwise, the latest will be assumed. For example: --build-arg "GF_INSTALL_PLUGINS=grafana-clock-panel 1.0.1,grafana-simple-json-datasource 1.3.5"

Example of how to build and run:

bash
cd custom
docker build \
  --build-arg "GRAFANA_VERSION=latest" \
  --build-arg "GF_INSTALL_PLUGINS=grafana-clock-panel,grafana-simple-json-datasource" \
  -t grafana-custom -f Dockerfile .

docker run -d -p 3000:3000 --name=grafana grafana-custom

Replace Dockerfile in above example with ubuntu.Dockerfile to build a custom Ubuntu based image (Grafana 6.5+).

With Grafana Image Renderer plugin pre-installed

Only available in Grafana v6.5+ and experimental.

The Grafana Image Renderer plugin does not currently work if it is installed in Grafana docker image. You can build a custom docker image by using the GF_INSTALL_IMAGE_RENDERER_PLUGIN build argument. This will install additional dependencies needed for the Grafana Image Renderer plugin to run.

Example of how to build and run:

bash
cd custom
docker build \
  --build-arg "GRAFANA_VERSION=latest" \
  --build-arg "GF_INSTALL_IMAGE_RENDERER_PLUGIN=true" \
  -t grafana-custom -f Dockerfile .

docker run -d -p 3000:3000 --name=grafana grafana-custom

Replace Dockerfile in above example with ubuntu.Dockerfile to build a custom Ubuntu based image.

Installing plugins from other sources

Only available in Grafana v5.3.1+

It’s possible to install plugins from custom url:s by specifying the url like this: GF_INSTALL_PLUGINS=<url to plugin zip>;<plugin name>

bash
docker run -d \
  -p 3000:3000 \
  --name=grafana \
  -e "GF_INSTALL_PLUGINS=http://plugin-domain.com/my-custom-plugin.zip;custom-plugin" \
  grafana/grafana

Configuring AWS credentials for CloudWatch Support

bash
$ docker run -d \
  -p 3000:3000 \
  --name=grafana \
  -e "GF_AWS_PROFILES=default" \
  -e "GF_AWS_default_ACCESS_KEY_ID=YOUR_ACCESS_KEY" \
  -e "GF_AWS_default_SECRET_ACCESS_KEY=YOUR_SECRET_KEY" \
  -e "GF_AWS_default_REGION=us-east-1" \
  grafana/grafana

You may also specify multiple profiles to GF_AWS_PROFILES (e.g. GF_AWS_PROFILES=default another).

Supported variables:

  • GF_AWS_${profile}_ACCESS_KEY_ID: AWS access key ID (required).
  • GF_AWS_${profile}_SECRET_ACCESS_KEY: AWS secret access key (required).
  • GF_AWS_${profile}_REGION: AWS region (optional).
bash
# create a persistent volume for your data in /var/lib/grafana (database and plugins)
docker volume create grafana-storage

# start grafana
docker run -d -p 3000:3000 --name=grafana -v grafana-storage:/var/lib/grafana grafana/grafana

Grafana container using bind mounts

You may want to run Grafana in Docker but use folders on your host for the database or configuration. When doing so it becomes important to start the container with a user that is able to access and write to the folder you map into the container.

bash
mkdir data # creates a folder for your data
ID=$(id -u) # saves your user id in the ID variable

# starts grafana with your user id and using the data folder
docker run -d --user $ID --volume "$PWD/data:/var/lib/grafana" -p 3000:3000 grafana/grafana:5.1.0

Reading secrets from files (support for Docker Secrets)

Only available in Grafana v5.2+.

It’s possible to supply Grafana with configuration through files. This works well with Docker Secrets as the secrets by default gets mapped into /run/secrets/<name of secret> of the container.

You can do this with any of the configuration options in conf/grafana.ini by setting GF_<SectionName>_<KeyName>__FILE to the path of the file holding the secret.

Let’s say you want to set the admin password this way:

  • Admin password secret: /run/secrets/admin_password
  • Environment variable: GF_SECURITY_ADMIN_PASSWORD__FILE=/run/secrets/admin_password

Migration from a previous version of the docker container to 5.1 or later

The Docker container for Grafana has seen a major rewrite for 5.1.

Important changes

  • file ownership is no longer modified during startup with chown
  • default user id 472 instead of 104
  • no more implicit volumes
    • /var/lib/grafana
    • /etc/grafana
    • /var/log/grafana

Removal of implicit volumes

Previously /var/lib/grafana, /etc/grafana and /var/log/grafana were defined as volumes in the Dockerfile. This led to the creation of three volumes each time a new instance of the Grafana container started, whether you wanted it or not.

You should always be careful to define your own named volume for storage, but if you depended on these volumes you should be aware that an upgraded container will no longer have them.

Warning: when migrating from an earlier version to 5.1 or later using docker compose and implicit volumes you need to use docker inspect to find out which volumes your container is mapped to so that you can map them to the upgraded container as well. You will also have to change file ownership (or user) as documented below.

User ID changes

In 5.1 we switched the id of the grafana user. Unfortunately this means that files created prior to 5.1 won’t have the correct permissions for later versions. We made this change so that it would be more likely that the grafana users id would be unique to Grafana. For example, on Ubuntu 16.04 104 is already in use by the syslog user.

VersionUserUser ID
< 5.1grafana104

= 5.1 | grafana | 472

There are two possible solutions to this problem. Either you start the new container as the root user and change ownership from 104 to 472 or you start the upgraded container as user 104.

Running docker as a different user

bash
docker run --user 104 --volume "<your volume mapping here>" grafana/grafana:5.1.0
Specifying a user in docker-compose.yml
yaml
version: "2"

services:
  grafana:
    image: grafana/grafana:5.1.0
    ports:
      - 3000:3000
    user: "104"

Modifying permissions

The commands below will run bash inside the Grafana container with your volume mapped in. This makes it possible to modify the file ownership to match the new container. Always be careful when modifying permissions.

bash
$ docker run -ti --user root --volume "<your volume mapping here>" --entrypoint bash grafana/grafana:5.1.0

# in the container you just started:
chown -R root:root /etc/grafana && \
  chmod -R a+r /etc/grafana && \
  chown -R grafana:grafana /var/lib/grafana && \
  chown -R grafana:grafana /usr/share/grafana

Migration from a previous version of the docker container to 6.4 or later

Grafana’s docker image was changed to be based on Alpine instead of Ubuntu.

Migration from a previous version of the docker container to 6.5 or later

Grafana Docker image now comes in two variants, one Alpine based and one Ubuntu based, see Image Variants for details.

Logging in for the first time

To run Grafana open your browser and go to http://localhost:3000/. 3000 is the default HTTP port that Grafana listens to if you haven’t configured a different port. Then follow the instructions here.