Tempo HTTP API
Tempo exposes an API for pushing and querying traces, and operating the cluster itself.
For the sake of clarity, API endpoints are grouped by service. These endpoints are exposed both when running Tempo in microservices and monolithic mode:
- microservices: each service exposes its own endpoints
- monolithic: the Tempo process exposes all API endpoints for the services running internally
For externally supported GRPC API, see below.
Endpoints
API | Service | Type | Endpoint |
---|---|---|---|
Readiness probe | All services | HTTP | GET /ready |
Metrics | All services | HTTP | GET /metrics |
Pprof | All services | HTTP | GET /debug/pprof |
Ingest traces | Distributor | - | See section for details |
Querying traces by id | Query-frontend | HTTP | GET /api/traces/<traceID> |
Searching traces | Query-frontend | HTTP | GET /api/search?<params> |
Search tag names | Query-frontend | HTTP | GET /api/search/tags |
Search tag names V2 | Query-frontend | HTTP | GET /api/v2/search/tags |
Search tag values | Query-frontend | HTTP | GET /api/search/tag/<tag>/values |
Search tag values V2 | Query-frontend | HTTP | GET /api/v2/search/tag/<tag>/values |
TraceQL Metrics | Query-frontend | HTTP | GET /api/metrics/query_range |
TraceQL Metrics (instant) | Query-frontend | HTTP | GET /api/metrics/query |
Query Echo Endpoint | Query-frontend | HTTP | GET /api/echo |
Overrides API | Query-frontend | HTTP | GET,POST,PATCH,DELETE /api/overrides |
Memberlist | Distributor, Ingester, Querier, Compactor | HTTP | GET /memberlist |
Flush | Ingester | HTTP | GET,POST /flush |
Shutdown | Ingester | HTTP | GET,POST /shutdown |
Distributor ring status (*) | Distributor | HTTP | GET /distributor/ring |
Ingesters ring status | Distributor, Querier | HTTP | GET /ingester/ring |
Metrics-generator ring status (*) | Distributor | HTTP | GET /metrics-generator/ring |
Compactor ring status | Compactor | HTTP | GET /compactor/ring |
Status | Status | HTTP | GET /status |
List build information | Status | HTTP | GET /api/status/buildinfo |
(*) This endpoint isn’t always available, check the specific section for more details.
Readiness probe
GET /ready
Returns status code 200 when Tempo is ready to serve traffic.
Metrics
GET /metrics
Returns the metrics for the running Tempo service in the Prometheus exposition format.
Pprof
GET /debug/pprof/heap
GET /debug/pprof/block
GET /debug/pprof/profile
GET /debug/pprof/trace
GET /debug/pprof/goroutine
GET /debug/pprof/mutex
Returns the runtime profiling data in the format expected by the pprof visualization tool. There are many things which can be profiled using this including heap, trace, goroutine, etc.
For more information, please check out the official documentation of pprof.
Ingest
The Tempo distributor uses the OpenTelemetry Collector receivers as a foundation to ingest trace data. These APIs are meant to be consumed by the corresponding client SDK or pipeline component, such as Grafana Agent, OpenTelemetry Collector, or Jaeger Agent.
Protocol | Type | Docs |
---|---|---|
OpenTelemetry | GRPC | Link |
OpenTelemetry | HTTP | Link |
Jaeger | Thrift Compact | Link |
Jaeger | Thrift Binary | Link |
Jaeger | Thrift HTTP | Link |
Jaeger | GRPC | Link |
Zipkin | HTTP | Link |
For information on how to use the Zipkin endpoint with curl (for debugging purposes), refer to Pushing spans with HTTP.
Query
The following request is used to retrieve a trace from the query frontend service in a microservices deployment or the Tempo endpoint in a monolithic mode deployment.
GET /api/traces/<traceid>?start=<start>&end=<end>
Parameters:
start = (unix epoch seconds)
Optional. Along withend
define a time range from which traces should be returned.end = (unix epoch seconds)
Optional. Along withstart
define a time range from which traces should be returned. Providing bothstart
andend
includes traces for the specified time range only. If the parameters aren’t provided then Tempo checks for the trace across all blocks in backend. If the parameters are provided, it only checks in the blocks within the specified time range, this can result in trace not being found or partial results if it doesn’t fall in the specified time range.
The following query API is also provided on the querier service for debugging purposes.
GET /querier/api/traces/<traceid>?mode=xxxx&blockStart=0000&blockEnd=FFFF&start=<start>&end=<end>
Parameters:
mode = (blocks|ingesters|all)
Specifies whether the querier should look for the trace in blocks, ingesters or both (all). Default =all
blockStart = (GUID)
Specifies the blockID start boundary. If specified, the querier only searches blocks with IDs > blockStart. Default =00000000-0000-0000-0000-000000000000
Example:blockStart=12345678-0000-0000-1235-000001240000
blockEnd = (GUID)
Specifies the blockID finish boundary. If specified, the querier only searches blocks with IDs < blockEnd. Default =FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF
Example:blockStart=FFFFFFFF-FFFF-FFFF-FFFF-456787652341
start = (unix epoch seconds)
Optional. Along withend
define a time range from which traces should be returned.end = (unix epoch seconds)
Optional. Along withstart
define a time range from which traces should be returned. Providing bothstart
andend
includes blocks for the specified time range only.
This API isn’t meant to be used directly unless for debugging the sharding functionality of the query frontend.
Returns
By default, this endpoint returns a mostly compatible OpenTelemetry JSON,
but if it can also send OpenTelemetry proto if Accept: application/protobuf
is passed.
Query V2
The following request is used to retrieve a trace from the query frontend service in a microservices deployment or the Tempo endpoint in a monolithic mode deployment.
GET /api/v2/traces/<traceid>?start=<start>&end=<end>
Parameters:
start = (unix epoch seconds)
Optional. Along withend
define a time range from which traces should be returned.end = (unix epoch seconds)
Optional. Along withstart
define a time range from which traces should be returned. Providing bothstart
andend
includes traces for the specified time range only. If the parameters aren’t provided then Tempo checks for the trace across all blocks in backend. If the parameters are provided, it only checks in the blocks within the specified time range, this can result in trace not being found or partial results if it doesn’t fall in the specified time range.
The following query API is also provided on the querier service for debugging purposes.
GET /querier/api/v2/traces/<traceid>?mode=xxxx&blockStart=0000&blockEnd=FFFF&start=<start>&end=<end>
Parameters:
mode = (blocks|ingesters|all)
Specifies whether the querier should look for the trace in blocks, ingesters or both (all). Default =all
blockStart = (GUID)
Specifies the blockID start boundary. If specified, the querier only searches blocks with IDs > blockStart. Default =00000000-0000-0000-0000-000000000000
Example:blockStart=12345678-0000-0000-1235-000001240000
blockEnd = (GUID)
Specifies the blockID finish boundary. If specified, the querier only searches blocks with IDs < blockEnd. Default =FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF
Example:blockStart=FFFFFFFF-FFFF-FFFF-FFFF-456787652341
start = (unix epoch seconds)
Optional. Along withend
define a time range from which traces should be returned.end = (unix epoch seconds)
Optional. Along withstart
define a time range from which traces should be returned. Providing bothstart
andend
includes blocks for the specified time range only.
Returns
By default, this endpoint returns Query response with a OpenTelemetry JSON trace,
but if it can also send OpenTelemetry proto if Accept: application/protobuf
is passed.
Search
The Tempo Search API finds traces based on span and process attributes (tags and values). Note that search functionality is not available on v2 blocks.
When performing a search, Tempo does a massively parallel search over the given time range, and takes the first N results. Even identical searches differs due to things like machine load and network latency. TraceQL follows the same behavior.
The API is available in the query frontend service in a microservices deployment, or the Tempo endpoint in a monolithic mode deployment.
The following request is used to find traces containing spans from service myservice
and the URL contains api/myapi
.
GET /api/search?tags=service.name%3Dmyservice%20http.url%3Dapi%2Fmyapi
The URL query parameters support the following values:
Parameters for TraceQL Search
q = (TraceQL query)
: Url encoded TraceQL query.
Parameters for Tag Based Search
tags = (logfmt)
: logfmt encoding of any span-level or process-level attributes to filter on. The value is matched as a case-insensitive substring. Key-value pairs are separated by spaces. If a value contains a space, it should be enclosed within double quotes.minDuration = (go duration value)
Optional. Find traces with at least this duration. Duration values are of the form10s
for 10 seconds,100ms
,30m
, etc.maxDuration = (go duration value)
Optional. Find traces with no greater than this duration. Uses the same form asminDuration
.
Parameters supported for all searches
limit = (integer)
Optional. Limit the number of search results. Default is 20, but this is configurable in the querier. Refer to Configuration.start = (unix epoch seconds)
Optional. Along withend
define a time range from which traces should be returned.end = (unix epoch seconds)
Optional. Along withstart
, define a time range from which traces should be returned. Providing bothstart
andend
changes the way that Tempo searches. If the parameters aren’t provided, then Tempo searches the recent trace data stored in the ingesters. If the parameters are provided, it searches the backend as well.spss = (integer)
Optional. Limit the number of spans per span-set. Default value is 3.
Example of TraceQL search
Example of how to query Tempo using curl. This query returns all traces that have their status set to error.
$ curl -G -s http://localhost:3200/api/search --data-urlencode 'q={ status=error }' | jq
{
"traces": [
{
"traceID": "2f3e0cee77ae5dc9c17ade3689eb2e54",
"rootServiceName": "shop-backend",
"rootTraceName": "update-billing",
"startTimeUnixNano": "1684778327699392724",
"durationMs": 557,
"spanSets": [
{
"spans": [
{
"spanID": "563d623c76514f8e",
"startTimeUnixNano": "1684778327735077898",
"durationNanos": "446979497",
"attributes": [
{
"key": "status",
"value": {
"stringValue": "error"
}
}
]
}
],
"matched": 1
}
]
],
"metrics": {
"totalBlocks": 13
}
}
Example of tags-based search
Example of how to query Tempo using curl.
This query returns all traces that have a tag service.name
containing cartservice
and a minimum duration of 600 ms.
$ curl -G -s http://localhost:3200/api/search --data-urlencode 'tags=service.name=cartservice' --data-urlencode minDuration=600ms | jq
{
"traces": [
{
"traceID": "d6e9329d67b6146a",
"rootServiceName": "frontend",
"rootTraceName": "/cart",
"startTimeUnixNano": "1634727903545000000",
"durationMs": 611
},
{
"traceID": "1b1ba462b409200d",
"rootServiceName": "frontend",
"rootTraceName": "/cart",
"startTimeUnixNano": "1634727775935000000",
"durationMs": 611
}
],
"metrics": {
"inspectedTraces": 3100,
"inspectedBytes": "3811736",
"totalBlocks": 3
}
}
Search tags
Ingester configuration complete_block_timeout
affects how long tags are available for search.
This endpoint retrieves all discovered tag names that can be used in search. The endpoint is available in the query frontend service in a microservices deployment, or the Tempo endpoint in a monolithic mode deployment. The tags endpoint takes a scope that controls the kinds of tags or attributes returned. If nothing is provided, the endpoint returns all resource and span tags.
GET /api/search/tags?scope=<resource|span|intrinsic>
Example
Example of how to query Tempo using curl. This query returns all discovered tag names.
$ curl -G -s http://localhost:3200/api/search/tags?scope=span | jq
{
"tagNames": [
"host.name",
"http.method",
"http.status_code",
"http.url",
"ip",
"load_generator.seq_num",
"name",
"region",
"root_cause_error",
"sampler.param",
"sampler.type",
"service.name",
"starter",
"version"
]
}
Parameters:
scope = (resource|span|intrinsic)
Optional. Specifies the scope of the tags. If not specified, it means all scopes. Default =all
start = (unix epoch seconds)
Optional. Along withend
, defines a time range from which tags should be returned.end = (unix epoch seconds)
Optional. Along withstart
, defines a time range from which tags should be returned. Providing bothstart
andend
includes blocks for the specified time range only.
Search tags V2
Ingester configuration complete_block_timeout
affects how long tags are available for search.
If the start or end aren’t specified, it only fetches blocks that weren’t flushed to backend.
This endpoint retrieves all discovered tag names that can be used in search. The endpoint is available in the query frontend service in a microservices deployment, or the Tempo endpoint in a monolithic mode deployment. The tags endpoint takes a scope that controls the kinds of tags or attributes returned. If nothing is provided, the endpoint returns all resource and span tags.
GET /api/v2/search/tags?scope=<resource|span|intrinsic>
Parameters:
scope = (resource|span|intrinsic)
Specifies the scope of the tags, this is an optional parameter, if not specified it means all scopes. Default =all
q = (traceql query)
Optional. A TraceQL query to filter tag names by. Currently only works for a single spanset of&&
ed conditions. For example:{ span.foo = "bar" && resource.baz = "bat" ...}
. See also Filtered tag values.start = (unix epoch seconds)
Optional. Along withend
define a time range from which tags should be returned.end = (unix epoch seconds)
Optional. Along withstart
define a time range from which tags should be returned. Providing bothstart
andend
includes blocks for the specified time range only.limit = (integer)
Optional. Sets the maximum number of tags names allowed per scope. The query stops once this limit is reached for any scope.maxStaleValues = (integer)
Optional. Limits the search for tag values. The search stops if the number of stale (already known) values reaches or exceeds this limit.
Example
Example of how to query Tempo using curl. This query returns all discovered tag names.
$ curl -G -s http://localhost:3200/api/v2/search/tags | jq
{
"scopes": [
{
"name": "span",
"tags": [
"article.count",
"http.flavor",
"http.method",
]
},
{
"name": "resource",
"tags": [
"k6",
"service.name"
]
},
{
"name": "intrinsic",
"tags": [
"duration",
"kind",
"name",
"status"
]
}
]
}
Search tag values
Ingester configuration complete_block_timeout
affects how long tags are available for search.
If start or end aren’t specified, it only fetches blocks that wasn’t flushed to backend.
This endpoint retrieves all discovered values for the given tag, which can be used in search. The endpoint is available in the query frontend service in a microservices deployment, or the Tempo endpoint in a monolithic mode deployment. The following request returns all discovered service names.
GET /api/search/tag/service.name/values
Example
Example of how to query Tempo using curl.
This query returns all discovered values for the tag service.name
.
$ curl -G -s http://localhost:3200/api/search/tag/service.name/values | jq
{
"tagValues": [
"adservice",
"cartservice",
"checkoutservice",
"frontend",
"productcatalogservice",
"recommendationservice"
]
}
Parameters:
start = (unix epoch seconds)
Optional. Along withend
, defines a time range from which tags should be returned.end = (unix epoch seconds)
Optional. Along withstart
, defines a time range from which tags should be returned. Providing bothstart
andend
includes blocks for the specified time range only.
Search tag values V2
This endpoint retrieves all discovered values and their data types for the given TraceQL identifier.
The endpoint is available in the query frontend service in a microservices deployment, or the Tempo endpoint in a monolithic mode deployment. This endpoint is similar to /api/search/tag/<tag>/values
but operates on TraceQL identifiers and types.
See TraceQL documentation for more information.
Example
This example queries Tempo using curl and returns all discovered values for the tag service.name
.
$ curl http://localhost:3200/api/v2/search/tag/.service.name/values | jq .
{
"tagValues": [
{
"type": "string",
"value": "customer"
},
{
"type": "string",
"value": "mysql"
},
{
"type": "string",
"value": "driver"
},
{
"type": "string",
"value": "frontend"
},
{
"type": "string",
"value": "redis"
}
]
}
This endpoint can also receive start
and end
optional parameters. These parameters define the time range from which the tags are fetched
Filtered tag values
You can pass an optional URL query parameter, q
, to your request.
The q
parameter is a URL-encoded TraceQL query.
If provided, the tag values returned by the API are filtered to only return values seen on spans matching your filter parameters.
Queries can be incomplete: for example, { resource.cluster = }
.
Tempo extracts only the valid matchers and builds a valid query.
If an input is invalid, Tempo doesn’t provide an error. Instead,
you’ll see the whole list when a failure of parsing input. This behavior helps with backwards compatibility.
Only queries with a single selector {}
and AND &&
operators are supported.
- Example supported:
{ resource.cluster = "us-east-1" && resource.service = "frontend" }
- Example unsupported:
{ resource.cluster = "us-east-1" || resource.service = "frontend" } && { resource.cluster = "us-east-2" }
Unscoped attributes aren’t supported for filtered tag values.
The following request returns all discovered service names on spans with span.http.method=GET
:
GET /api/v2/search/tag/resource.service.name/values?q="{span.http.method='GET'}"
If a particular service name (for example, shopping-cart
) is only present on spans with span.http.method=POST
, it won’t be included in the list of values returned.
TraceQL Metrics
The TraceQL Metrics API returns Prometheus-like time-series for a given metrics query.
Metrics queries are those using metrics functions like rate()
and quantile_over_time()
.
Refer to the TraceQL metrics documentation for more information list.
Parameters:
q = (traceql query)
The TraceQL metrics query to process.start = (unix epoch seconds | unix epoch nanoseconds | RFC3339 string)
Optional. Along withend
defines the time range.end = (unix epoch seconds | unix epoch nanoseconds | RFC3339 string)
Optional. Along withstart
define the time range. Providing bothstart
andend
includes blocks for the specified time range only.since = (duration string)
Optional. Can be used instead ofstart
andend
to define the time range in relative values. For example,since=15m
queries the last 15 minutes. Default is the last 1 hour.step = (duration string)
Optional. Defines the granularity of the returned time-series. For example,step=15s
returns a data point every 15s within the time range. If not specified, then the default behavior chooses a dynamic step based on the time range.exemplars = (integer)
Optional. Defines the maximun number of exemplars for the query. It will be trimmed to max_exemplars if exceed it.
The API is available in the query frontend service in a microservices deployment, or the Tempo endpoint in a monolithic mode deployment.
For example, the following request computes the rate of spans received for myservice
over the last three hours, at 1 minute intervals.
Note
Actual API parameters must be url-encoded. This example is left unencoded for readability.
GET /api/metrics/query_range?q={resource.service.name="myservice"}|rate()&since=3h&step=1m
Instant
The instant version of the metrics API is similar to the range version, but instead returns a single value for the query. This version is useful when you don’t need the granularity of a full time-series, but instead want a total sum, or single value computed across the whole time range.
The parameters are identical to the range version except there is no step
.
Parameters:
q = (traceql query)
The TraceQL metrics query to process.start = (unix epoch seconds | unix epoch nanoseconds | RFC3339 string)
Optional. Along withend
defines the time range.end = (unix epoch seconds | unix epoch nanoseconds | RFC3339 string)
Optional. Along withstart
define the time range. Providing bothstart
andend
includes blocks for the specified time range only.since = (duration string)
Optional. Can be used instead ofstart
andend
to define the time range in relative values. For examplesince=15m
will query the last 15 minutes. Default is last 1 hour.
The API is available in the query frontend service in a microservices deployment, or the Tempo endpoint in a monolithic mode deployment.
For example the following request computes the total number of failed spans over the last hour per service.
Note
Actual API parameters must be url-encoded. This example is left unencoded for readability.
GET /api/metrics/query?q={status=error}|count_over_time()by(resource.service.name)
Query Echo endpoint
GET /api/echo
Returns status code 200 and body echo
when the query frontend is up and ready to receive requests.
Note
Meant to be used in a Query Visualization UI like Grafana to test that the Tempo data source is working.
Overrides API
For more information about user-configurable overrides API, refer to the [user-configurable overrides]/docs/tempo/v2.6.x/operations/user-configurable-overrides/#api documentation.
Flush
GET,POST /flush
Triggers a flush of all in-memory traces to the WAL. Useful at the time of rollout restarts and unexpected crashes.
Specify the tenant
parameter to flush data of a single tenant only.
GET,POST /flush?tenant=dev
Shutdown
GET,POST /shutdown
Flushes all in-memory traces and the WAL to the long term backend. Gracefully exits from the ring. Shuts down the ingester service.
Note
This is usually used at the time of scaling down a cluster.
Distributor ring status
Note
This endpoint is only available when Tempo is configured with the global override strategy.
GET /distributor/ring
Displays a web page with the distributor hash ring status, including the state, healthy, and last heartbeat time of each distributor.
For more information, check the page on consistent hash ring.
Ingesters ring status
GET /ingester/ring
Displays a web page with the ingesters hash ring status, including the state, healthy, and last heartbeat time of each ingester.
_For more information, check the page on consistent hash ring.
Metrics-generator ring status
GET /metrics-generator/ring
Displays a web page with the metrics-generator hash ring status, including the state, health, and last heartbeat time of each metrics-generator.
This endpoint is only available when the metrics-generator is enabled. Refer to metrics-generator.
For more information, refer to consistent hash ring.
Compactor ring status
GET /compactor/ring
Displays a web page with the compactor hash ring status, including the state, healthy and last heartbeat time of each compactor.
For more information, refer to consistent hash ring.
Status
GET /status
Print all available information by default.
GET /status/version
Print the version information.
GET /status/services
Displays a list of services and their status. If a service failed it shows the failure case.
GET /status/endpoints
Displays status information about the API endpoints.
GET /status/config
Displays the configuration.
Displays the configuration currently applied to Tempo (in YAML format), including default values and settings via CLI flags. Sensitive data is masked. Please be aware that the exported configuration doesn’t include the per-tenant overrides.
Optional query parameter:
mode = (diff|defaults)
:diff
shows the difference between the default values and the current configuration.defaults
shows the default values.
GET /status/runtime_config
Displays the override configuration.
Query parameter:
mode = (diff)
: Show the difference between defaults and overrides.
GET /status/overrides
Displays all tenants that have non-default overrides configured.
GET /status/overrides/{tenant}
Displays all overrides configured for the specified tenant.
GET /status/usage-stats
Displays anonymous usage stats data that’s reported back to Grafana Labs.
List build information
GET /api/status/buildinfo
Exposes the build information in a JSON object. The fields are version
, revision
, branch
, buildDate
, buildUser
, and goVersion
.
Tempo GRPC API
Tempo uses GRPC to internally communicate with itself, but only has one externally supported client. The query-frontend component implements the streaming querier interface defined below. See here for the complete proto definition and generated code.
By default, this service is only offered over the GRPC port. You can use streaming service over the HTTP port as well, which Grafana expects.
To enable the streaming service over the HTTP port for use with Grafana, set the following:
stream_over_http_enabled: true
The query frontend supports the following interface. Refer to tempo.proto
for complete details of all objects.
service StreamingQuerier {
rpc Search(SearchRequest) returns (stream SearchResponse);
rpc SearchTags(SearchTagsRequest) returns (stream SearchTagsResponse) {}
rpc SearchTagsV2(SearchTagsRequest) returns (stream SearchTagsV2Response) {}
rpc SearchTagValues(SearchTagValuesRequest) returns (stream SearchTagValuesResponse) {}
rpc SearchTagValuesV2(SearchTagValuesRequest) returns (stream SearchTagValuesV2Response) {}
rpc MetricsQueryRange(QueryRangeRequest) returns (stream QueryRangeResponse) {}
}