Documentation Grafana Alloy Reference Components otelcol otelcol.exporter.otlphttp

otelcol.exporter.otlphttp

otelcol.exporter.otlphttp accepts telemetry data from other otelcol components and writes them over the network using the OTLP HTTP protocol.

You can specify multiple otelcol.exporter.otlphttp components by giving them different labels.

Usage

alloy Copy

otelcol.exporter.otlphttp "LABEL" {
  client {
    endpoint = "HOST:PORT"
  }
}

Arguments

otelcol.exporter.otlphttp supports the following arguments:

The default value depends on the endpoint field set in the required client block. If set, these arguments override the client.endpoint field for the corresponding signal.

Blocks

The following blocks are supported inside the definition of otelcol.exporter.otlphttp:

The > symbol indicates deeper levels of nesting. For example, client > tls refers to a tls block defined inside a client block.

client block

The client block configures the HTTP client used by the component.

The following arguments are supported:

When setting headers, note that:

• Certain headers such as Content-Length and Connection are automatically written when needed and values in headers may be ignored.
• The Host header is automatically derived from the endpoint value. However, this automatic assignment can be overridden by explicitly setting a Host header in headers.

Setting disable_keep_alives to true will result in significant overhead establishing a new HTTP or HTTPS connection for every request. Before enabling this option, consider whether changes to idle connection settings can achieve your goal.

If http2_ping_timeout is unset or set to 0s, it will default to 15s.

If http2_read_idle_timeout is unset or set to 0s, then no health check will be performed.

By default, requests are compressed with Gzip. The compression argument controls which compression mechanism to use. Supported strings are:

• "gzip"
• "zlib"
• "deflate"
• "snappy"
• "zstd"

If you set compression to "none" or an empty string "", the requests aren’t compressed.

cookies block

The cookies block allows the HTTP client to store cookies from server responses and reuse them in subsequent requests.

This could be useful in situations such as load balancers relying on cookies for sticky sessions and enforcing a maximum session age.

The following arguments are supported:

tls block

The tls block configures TLS settings used for the connection to the HTTP server.

The following arguments are supported:

If the server doesn’t support TLS, you must set the insecure argument to true.

To disable tls for connections to the server, set the insecure argument to true.

If reload_interval is set to "0s", the certificate never reloaded.

The following pairs of arguments are mutually exclusive and can’t both be set simultaneously:

• ca_pem and ca_file
• cert_pem and cert_file
• key_pem and key_file

If cipher_suites is left blank, a safe default list is used. See the Go TLS documentation for a list of supported cipher suites.

sending_queue block

The sending_queue block configures an in-memory buffer of batches before data is sent to the HTTP server.

The following arguments are supported:

When enabled is true, data is first written to an in-memory buffer before sending it to the configured server. Batches sent to the component’s input exported field are added to the buffer as long as the number of unsent batches doesn’t exceed the configured queue_size.

queue_size determines how long an endpoint outage is tolerated. Assuming 100 requests/second, the default queue size 1000 provides about 10 seconds of outage tolerance. To calculate the correct value for queue_size, multiply the average number of outgoing requests per second by the time in seconds that outages are tolerated. A very high value can cause Out Of Memory (OOM) kills.

The num_consumers argument controls how many readers read from the buffer and send data in parallel. Larger values of num_consumers allow data to be sent more quickly at the expense of increased network traffic.

retry_on_failure block

The retry_on_failure block configures how failed requests to the HTTP server are retried.

The following arguments are supported:

When enabled is true, failed batches are retried after a given interval. The initial_interval argument specifies how long to wait before the first retry attempt. If requests continue to fail, the time to wait before retrying increases by the factor specified by the multiplier argument, which must be greater than 1.0. The max_interval argument specifies the upper bound of how long to wait between retries.

The randomization_factor argument is useful for adding jitter between retrying Alloy instances. If randomization_factor is greater than 0, the wait time before retries is multiplied by a random factor in the range [ I - randomization_factor * I, I + randomization_factor * I], where I is the current interval.

If a batch hasn’t been sent successfully, it is discarded after the time specified by max_elapsed_time elapses. If max_elapsed_time is set to "0s", failed requests are retried forever until they succeed.

debug_metrics block

The debug_metrics block configures the metrics that this component generates to monitor its state.

The following arguments are supported:

disable_high_cardinality_metrics is the Grafana Alloy equivalent to the telemetry.disableHighCardinalityMetrics feature gate in the OpenTelemetry Collector. It removes attributes that could cause high cardinality metrics. For example, attributes with IP addresses and port numbers in metrics about HTTP and gRPC connections are removed.

level is the Alloy equivalent to the telemetry.metrics.level feature gate in the OpenTelemetry Collector. Possible values are "none", "basic", "normal" and "detailed".

Exported fields

The following fields are exported and can be referenced by other components:

input accepts otelcol.Consumer data for any telemetry signal (metrics, logs, or traces).

Component health

otelcol.exporter.otlphttp is only reported as unhealthy if given an invalid configuration.

Debug information

otelcol.exporter.otlphttp doesn’t expose any component-specific debug information.

Example

This example creates an exporter to send data to a locally running Grafana Tempo without TLS:

alloy Copy

otelcol.exporter.otlphttp "tempo" {
    client {
        endpoint = "http://tempo:4317"
        tls {
            insecure             = true
            insecure_skip_verify = true
        }
    }
}

Compatible components

otelcol.exporter.otlphttp has exports that can be consumed by the following components:

• Components that consume OpenTelemetry otelcol.Consumer