Important: This documentation is about an older version. It's relevant only to the release noted, many of the features and functions have been updated or replaced. Please view the current version.
Scaling out Grafana Mimir
Grafana Mimir can horizontally scale every component. Scaling out Grafana Mimir means that to respond to increased load, you can increase the number of replicas of each Grafana Mimir component.
We have designed Grafana Mimir to scale up quickly, safely, and with no manual intervention. However, be careful when scaling down some of the stateful components as these actions can result in writes and reads failures, or partial query results.
When running Grafana Mimir in monolithic mode, you can safely scale up to any number of instances. To scale down the Grafana Mimir cluster, see Scaling down ingesters.
When running Grafana Mimir in read-write mode, you can safely scale up any of the three components:
You can safely scale the Mimir read component up or down because it is stateless. You could also use an autoscaler.
You can safely scale the Mimir backend component down within one zone at a time. Because it contains the store-gateway, for more information see Scaling down store-gateways.
To scale down the Mimir write component, see Scaling down ingesters.
When running Grafana Mimir in microservices mode, you can safely scale up any component. You can also safely scale down any stateless component.
The following stateful components have limitations when scaling down:
Scaling down Alertmanagers
Scaling down Alertmanagers can result in downtime.
Consider the following guidelines when you scale down Alertmanagers:
- Scale down no more than two Alertmanagers at the same time.
- Ensure at least
-alertmanager.sharding-ring.replication-factorAlertmanager instances are running (three when running Grafana Mimir with the default configuration).
Note: If you enabled zone-aware replication for Alertmanagers, you can, in parallel, scale down any number of Alertmanager instances within one zone at a time.
Scaling down ingesters
Ingesters store recently received samples in memory. When an ingester shuts down, because of a scale down operation, the samples stored in the ingester cannot be discarded in order to guarantee no data loss.
You might experience the following challenges when you scale down ingesters:
By default, when an ingester shuts down, the samples stored in the ingester are not uploaded to the long-term storage, which causes data loss.
Ingesters expose an API endpoint
/ingester/shutdownthat flushes in-memory time series data from ingester to the long-term storage and unregisters the ingester from the ring.
/ingester/shutdownAPI endpoint successfully returns, the ingester does not receive write or read requests, but the process will not exit.
You can terminate the process by sending a
SIGTERMsignal after the shutdown endpoint returns.
To mitigate this challenge, ensure that the ingester blocks are uploaded to the long-term storage before shutting down.
When you scale down ingesters, the querier might temporarily return partial results.
The blocks an ingester uploads to the long-term storage are not immediately available for querying. It takes the queriers and store-gateways some time before a newly uploaded block is available for querying. If you scale down two or more ingesters in a short period of time, queries might return partial results.
Scaling down ingesters deployed in a single zone (default)
Complete the following steps to scale down ingesters deployed in a single zone.
Configure the Grafana Mimir cluster to discover and query new uploaded blocks as quickly as possible.
a. Configure queriers and rulers to always query the long-term storage and to disable ingesters shuffle sharding on the read path:
b. Configure the compactors to frequently update the bucket index:
c. Configure the store-gateways to frequently refresh the bucket index and to immediately load all blocks:
d. Configure queriers, rulers and store-gateways with reduced TTLs for the metadata cache:
-blocks-storage.bucket-store.metadata-cache.bucket-index-content-ttl=1m -blocks-storage.bucket-store.metadata-cache.tenants-list-ttl=1m -blocks-storage.bucket-store.metadata-cache.tenant-blocks-list-ttl=1m -blocks-storage.bucket-store.metadata-cache.metafile-doesnt-exist-ttl=1m
Scale down one ingester at a time:
a. Invoke the
/ingester/shutdownAPI endpoint on the ingester to terminate.
b. Wait until the API endpoint call has successfully returned and the ingester logged “finished flushing and shipping TSDB blocks”.
c. Send a
SIGTERMsignal to the process of the ingester to terminate.
d. Wait 10 minutes before proceeding with the next ingester. The temporarily applied configuration guarantees newly uploaded blocks are available for querying within 10 minutes.
Wait until the originally configured
-querier.query-store-afterperiod of time has elapsed since when all ingesters have been shutdown.
Revert the temporary configuration changes done at the beginning of the scale down procedure.
Scaling down ingesters deployed in multiple zones
Grafana Mimir can tolerate a full-zone outage when you deploy ingesters in multiple zones. A scale down of ingesters in one zone can be seen as a partial-zone outage. To simplify the scale down process, you can leverage ingesters deployed in multiple zones.
For each zone, complete the following steps:
- Invoke the
/ingester/shutdownAPI endpoint on all ingesters that you want to terminate.
- Wait until the API endpoint calls have successfully returned and the ingester has logged “finished flushing and shipping TSDB blocks”.
- Send a
SIGTERMsignal to the processes of the ingesters that you want to terminate.
- Wait until the blocks uploaded by terminated ingesters are available for querying before proceeding with the next zone.
The required amount of time to wait depends on your configuration and it’s the maximum value for the following settings:
- The configured
- Two times the configured
- Two times the configured
Scaling down store-gateways
To guarantee no downtime when scaling down store-gateways, complete the following steps:
- Ensure at least
-store-gateway.sharding-ring.replication-factorstore-gateway instances are running (three when running Grafana Mimir with the default configuration).
- Scale down no more than two store-gateways at the same time.
If you enabled zone-aware replication
for store-gateways, you can in parallel scale down any number of store-gateway instances in one zone at a time.
Zone-aware replication is enabled by default in the
- Stop the store-gateway instances you want to scale down.
- If you have set the value of
false, then remove the stopped instances from the store-gateway ring:
- In a browser, go to the
GET /store-gateway/ringpage that store-gateways expose on their HTTP port.
- Click Forget on the instances that you scaled down.
Alternatively, wait for the duration of the value of
-store-gateway.sharding-ring.heartbeat-timeouttimes 10. The default value of
-store-gateway.sharding-ring.heartbeat-timeoutis one minute.
- In a browser, go to the
- Proceed with the next two store-gateway replicas. If you are using zone-aware replication, the proceed with the next zone.