Menu

Important: This documentation is about an older version. It's relevant only to the release noted, many of the features and functions have been updated or replaced. Please view the current version.

Grafana Cloud Enterprise Open source

Time series

Time series visualizations are the default way to show the variations of a set of data values over time. Each data point is matched to a timestamp and this time series is displayed as a graph. The visualization can render series as lines, points, or bars and it’s versatile enough to display almost any type of time-series data.

Time series

Note

You can migrate from the legacy Graph visualization to the time series visualization. To migrate, open the panel and click the Migrate button in the side pane.

A time series visualization displays an x-y graph with time progression on the x-axis and the magnitude of the values on the y-axis. This visualization is ideal for displaying large numbers of timed data points that would be hard to track in a table or list.

You can use the time series visualization if you need track:

  • Temperature variations throughout the day
  • The daily progress of your retirement account
  • The distance you jog each day over the course of a year

Configure a time series visualization

The following video guides you through the creation steps and common customizations of time series visualizations, and is great for beginners:

Give it a try using Grafana Play

With Grafana Play, you can explore and see how it works, learning from practical examples to accelerate your development. This feature can be seen on Time Series Visualizations in Grafana.

Supported data formats

Time series visualizations require time-series data—a sequence of measurements, ordered in time, and formatted as a table—where every row in the table represents one individual measurement at a specific time. Learn more about time-series data.

The dataset must contain at least one numeric field, and in the case of multiple numeric fields, each one is plotted as a new line, point, or bar labeled with the field name in the tooltip.

Example 1

In the following example, there are three numeric fields represented by three lines in the chart:

Timevalue1value2value3
2022-11-01 10:00:00123
2022-11-01 11:00:00456
2022-11-01 12:00:00789
2022-11-01 13:00:00456

Time series line chart with multiple numeric fields

If the time field isn’t automatically detected, you might need to convert the data to a time format using a data transformation.

Example 2

The time series visualization also supports multiple datasets. If all datasets are in the correct format, the visualization plots the numeric fields of all datasets and labels them using the column name of the field.

Query1

Timevalue1value2value3
2022-11-01 10:00:00123
2022-11-01 11:00:00456
2022-11-01 12:00:00789

Query2

timestampnumber1number2number3
2022-11-01 10:30:00111213
2022-11-01 11:30:00141516
2022-11-01 12:30:00171819
2022-11-01 13:30:00141516

Time series line chart with two datasets

Example 3

If you want to more easily compare events between different, but overlapping, time frames, you can do this by using a time offset while querying the compared dataset:

Query1

Timevalue1value2value3
2022-11-01 10:00:00123
2022-11-01 11:00:00456
2022-11-01 12:00:00789

Query2

timestamp(-30min)number1number2number3
2022-11-01 10:30:00111213
2022-11-01 11:30:00141516
2022-11-01 12:30:00171819
2022-11-01 13:30:00141516

Time Series Example with second Data Set offset

When you add the offset, the resulting visualization makes the datasets appear to be occurring at the same time so that you can compare them more easily.

Alert rules

You can link alert rules to time series visualizations in the form of annotations to observe when alerts fire and are resolved. In addition, you can create alert rules from the Alert tab within the panel editor.

Special overrides

The following overrides help you further refine a time series visualization.

Transform override property

Use the Graph styles > Transform override property to transform series values without affecting the values shown in the tooltip, context menu, or legend. Choose from the following transform options:

  • Constant - Show the first value as a constant line.
  • Negative Y transform - Flip the results to negative values on the y-axis.

Fill below to override property

The Graph styles > Fill below to override property fills the area between two series. When you configure the property, select the series for which you want the fill to stop.

The following example shows three series: Min, Max, and Value. The Min and Max series have Line width set to 0. Max has a Fill below to override set to Min, which fills the area between Max and Min with the Max line color.

Fill below to example

Multiple y-axes

In some cases, you might want to display multiple y-axes. For example, if you have a dataset showing both temperature and humidity over time, you might want to show two y-axes with different units for the two series.

You can configure multiple y-axes and control where they’re displayed in the visualization by adding field overrides. This example of a dataset that includes temperature and humidity describes how you can configure that. Repeat the steps for every y-axis you wish to display.

Configuration options

The following section describes the configuration options available in the panel editor pane for this visualization. These options are, as much as possible, ordered as they appear in Grafana.

Panel options

In the Panel options section of the panel editor pane, set basic options like panel title and description, as well as panel links. To learn more, refer to Configure panel options.

Tooltip options

Tooltip options control the information overlay that appears when you hover over data points in the visualization.

OptionDescription
Tooltip modeWhen you hover your cursor over the visualization, Grafana can display tooltips. Choose how tooltips behave.
Values sort orderThis option controls the order in which values are listed in a tooltip.
Hover proximitySet the hover proximity (in pixels) to control how close the cursor must be to a data point to trigger the tooltip to display.
Max widthSet the maximum width of the tooltip box.
Max heightSet the maximum height of the tooltip box. The default is 600 pixels.

Tooltip mode

When you hover your cursor over the visualization, Grafana can display tooltips. Choose how tooltips behave.

  • Single - The hover tooltip shows only a single series, the one that you are hovering over on the visualization.
  • All - The hover tooltip shows all series in the visualization. Grafana highlights the series that you are hovering over in bold in the series list in the tooltip.
  • Hidden - Do not display the tooltip when you interact with the visualization.

Use an override to hide individual series from the tooltip.

Values sort order

When you set the Tooltip mode to All, the Values sort order option is displayed. This option controls the order in which values are listed in a tooltip. Choose from the following:

  • None - Grafana automatically sorts the values displayed in a tooltip.
  • Ascending - Values in the tooltip are listed from smallest to largest.
  • Descending - Values in the tooltip are listed from largest to smallest.

Hover proximity

Set the hover proximity (in pixels) to control how close the cursor must be to a data point to trigger the tooltip to display.

Adding a hover proximity limit for tooltips

Legend options

Legend options control the series names and statistics that appear under or to the right of the graph. For more information about the legend, refer to Configure a legend.

OptionDescription
VisibilityToggle the switch to turn the legend on or off.
ModeUse these settings to define how the legend appears in your visualization. List displays the legend as a list. This is a default display mode of the legend. Table displays the legend as a table.
PlacementChoose where to display the legend. Bottom places the legend below the graph. Right places the legend to the right of the graph.
WidthControl how wide the legend is when placed on the right side of the visualization. This option is only displayed if you set the legend placement to Right.
ValuesChoose which of the standard calculations to show in the legend. You can have more than one.

Axis options

Options under the Axis section control how the x- and y-axes are rendered. Some options don’t take effect until you click outside of the field option box you’re editing. You can also press Enter.

OptionDescription
Time zoneSet the desired time zones to display along the x-axis.
PlacementSelect the placement of the y-axis.
LabelSet a y-axis text label. If you have more than one y-axis, then you can assign different labels using an override.
WidthSet a fixed width of the axis. By default, Grafana dynamically calculates the width of an axis. By setting the width of the axis, data with different axes types can share the same display proportions. This setting makes it easier for you to compare more than one graph’s worth of data because the axes aren’t shifted or stretched within visual proximity to each other.
Show grid linesSet the axis grid line visibility.
ColorSet the color of the axis.
Show borderSet the axis border visibility.
ScaleSet the y-axis values scale.
Centered zeroSet the y-axis so it’s centered on zero.
Soft minSet a soft min to better control the y-axis limits. zero.
Soft maxSet a soft max to better control the y-axis limits. zero.

Placement

Select the placement of the y-axis. Choose from the following:

  • Auto - Automatically assigns the y-axis to the series. When there are two or more series with different units, Grafana assigns the left axis to the first unit and the right axis to the units that follow.
  • Left - Display all y-axes on the left side.
  • Right - Display all y-axes on the right side.
  • Hidden - Hide all axes. To selectively hide axes, Add a field override that targets specific fields.

Soft min and soft max

Set a Soft min or soft max option for better control of y-axis limits. By default, Grafana sets the range for the y-axis automatically based on the dataset.

Soft min and soft max settings can prevent small variations in the data from being magnified when it’s mostly flat. In contrast, hard min and max values help prevent obscuring useful detail in the data by clipping intermittent spikes past a specific point.

To define hard limits of the y-axis, set standard min/max options. For more information, refer to Configure standard options.

Label example

Graph styles options

The options under the Graph styles section let you control the general appearance of the graph, excluding color.

OptionDescription
StyleChoose whether to display your time-series data as lines, bars, or points.
Line interpolationChoose how the graph interpolates the series line.
Line widthSet the thickness of the series lines or the outline for bars using the Line width slider.
Fill opacitySet the series area fill color using the Fill opacity slider.
Gradient modeChoose a gradient mode to control the gradient fill, which is based on the series color.
Line styleChoose a solid, dashed, or dotted line style.
Connect null valuesChoose how null values, which are gaps in the data, appear on the graph.
Disconnect valuesChoose whether to set a threshold above which values in the data should be disconnected.
Show pointsSet whether to show data points to lines or bars.
Point sizeSet the size of the points, from 1 to 40 pixels in diameter.
Stack seriesSet whether Grafana displays series on top of each other.
Bar alignmentSet the position of the bar relative to a data point.
Bar width factorSet the width of the bar relative to minimum space between data points. A factor of 0.5 means that the bars take up half of the available space between data points. A factor of 1.0 means that the bars take up all available space.

Style

Choose whether to display your time-series data as lines, bars, or points. You can use overrides to combine multiple styles in the same graph. Choose from the following:

Style modes

Line interpolation

Choose how the graph interpolates the series line:

  • Linear - Points are joined by straight lines.
  • Smooth - Points are joined by curved lines that smooths transitions between points.
  • Step before - The line is displayed as steps between points. Points are rendered at the end of the step.
  • Step after - The line is displayed as steps between points. Points are rendered at the beginning of the step.

Line width

Set the thickness of the series lines or the outline for bars using the Line width slider.

Fill opacity

Set the series area fill color using the Fill opacity slider.

Fill opacity examples

Gradient mode

Choose a gradient mode to control the gradient fill, which is based on the series color. To change the color, use the standard color scheme field option. For more information, refer to Color scheme.

  • None - No gradient fill. This is the default setting.
  • Opacity - An opacity gradient where the opacity of the fill increases as y-axis values increase.
  • Hue - A subtle gradient that’s based on the hue of the series color.
  • Scheme - A color gradient defined by your Color scheme. This setting is used for the fill area and line. For more information about scheme, refer to Scheme gradient mode.

Gradient appearance is influenced by the Fill opacity setting. The following image shows the Fill opacity set to 50.

Gradient mode examples

Scheme gradient mode

The Gradient mode option located under the Graph styles section has a mode called Scheme. When you enable Scheme, the line or bar receives a gradient color defined from the selected Color scheme.

From thresholds

If the Color scheme is set to From thresholds (by value) and Gradient mode is set to Scheme, then the line or bar color changes as it crosses the defined thresholds.

Colors scheme: From thresholds
Gradient color schemes

The following image shows a line chart with the Green-Yellow-Red (by value) color scheme option selected.

Color scheme: Green-Yellow-Red

Line style

Choose a solid, dashed, or dotted line style:

  • Solid - Display a solid line. This is the default setting.
  • Dash - Display a dashed line. When you choose this option, a list appears for you to select the length and gap (length, gap) for the line dashes. Dash spacing is 10, 10 by default.
  • Dots - Display dotted lines. When you choose this option, a list appears for you to select the gap (length = 0, gap) for the dot spacing. Dot spacing is 0, 10 by default.

Line styles examples

Connect null values

Choose how null values, which are gaps in the data, appear on the graph. Null values can be connected to form a continuous line or set to a threshold above which gaps in the data are no longer connected.

  • Never - Time series data points with gaps in the data are never connected.
  • Always - Time series data points with gaps in the data are always connected.
  • Threshold - Specify a threshold above which gaps in the data are no longer connected. This can be useful when the connected gaps in the data are of a known size and/or within a known range, and gaps outside this range should no longer be connected.

Disconnect values

Choose whether to set a threshold above which values in the data should be disconnected.

  • Never - Time series data points in the data are never disconnected.
  • Threshold - Specify a threshold above which values in the data are disconnected. This can be useful when desired values in the data are of a known size and/or within a known range, and values outside this range should no longer be connected.

To change the color, use the standard color scheme field option.

Show points

Set whether to show data points as lines or bars. Choose from the following:

  • Auto - Grafana determines a point’s visibility based on the density of the data. If the density is low, then points appear.
  • Always - Show the points regardless of how dense the data set is.
  • Never - Don’t show points.

Stack series

Set whether Grafana stacks or displays series on top of each other. Be cautious when using stacking because it can create misleading graphs. To read more about why stacking might not be the best approach, refer to The issue with stacking. Choose from the following:

  • Off - Turns off series stacking. When Off, all series share the same space in the visualization.
  • Normal - Stacks series on top of each other.
  • 100% - Stack by percentage where all series add up to 100%.
Stack series in groups

The stacking group option is only available as an override. For more information about creating an override, refer to Configure field overrides.

  1. Edit the panel and click Overrides.

  2. Create a field override for the Stack series option.

  3. In stacking mode, click Normal.

  4. Name the stacking group in which you want the series to appear.

    The stacking group name option is only available when you create an override.

Bar alignment

Set the position of the bar relative to a data point. In the examples below, Show points is set to Always which makes it easier to see the difference this setting makes. The points don’t change, but the bars change in relationship to the points. Choose from the following:

  • Before Bar alignment before icon The bar is drawn before the point. The point is placed on the trailing corner of the bar.
  • Center Bar alignment center icon The bar is drawn around the point. The point is placed in the center of the bar. This is the default.
  • After Bar alignment after icon The bar is drawn after the point. The point is placed on the leading corner of the bar.

Standard options

Standard options in the panel editor pane let you change how field data is displayed in your visualizations. When you set a standard option, the change is applied to all fields or series. For more granular control over the display of fields, refer to Configure overrides.

OptionDescription
UnitChoose which unit a field should use.
Min/MaxSet the minimum and maximum values used in percentage threshold calculations or leave these field empty for them to be calculated automatically.
Field min/maxEnable Field min/max to have Grafana calculate the min or max of each field individually, based on the minimum or maximum value of the field.
DecimalsSpecify the number of decimals Grafana includes in the rendered value.
Display nameSet the display title of all fields. You can use variables in the field title.
Color schemeSet single or multiple colors for your entire visualization.
No valueEnter what Grafana should display if the field value is empty or null. The default value is a hyphen (-).

To learn more, refer to Configure standard options.

Data links allow you to link to other panels, dashboards, and external resources while maintaining the context of the source panel. You can create links that include the series name or even the value under the cursor.

For each data link, set the following options:

  • Title
  • URL
  • Open in new tab

To learn more, refer to Configure data links.

Value mappings

Value mapping is a technique you can use to change how data appears in a visualization.

For each value mapping, set the following options:

  • Condition - Choose what’s mapped to the display text and (optionally) color:
    • Value - Specific values
    • Range - Numerical ranges
    • Regex - Regular expressions
    • Special - Special values like Null, NaN (not a number), or boolean values like true and false
  • Display text
  • Color (Optional)
  • Icon (Canvas only)

To learn more, refer to Configure value mappings.

Thresholds

A threshold is a value or limit you set for a metric that’s reflected visually when it’s met or exceeded. Thresholds are one way you can conditionally style and color your visualizations based on query results.

For each threshold, set the following options:

OptionDescription
ValueSet the value for each threshold.
Thresholds modeChoose from Absolute and Percentage.
Show thresholdsChoose from a variety of display options including not displaying thresholds at all.

To learn more, refer to Configure thresholds.

Field overrides

Overrides allow you to customize visualization settings for specific fields or series. When you add an override rule, it targets a particular set of fields and lets you define multiple options for how that field is displayed.

Choose from the following override options:

OptionDescription
Fields with nameSelect a field from the list of all available fields.
Field with name matching regexSpecify fields to override with a regular expression.
Fields with typeSelect fields by type, such as string, numeric, or time.
Fields returned by querySelect all fields returned by a specific query, such as A, B, or C.
Fields with valuesSelect all fields returned by your defined reducer condition, such as Min, Max, Count, Total.

To learn more, refer to Configure field overrides.