Using MySQL in Grafana
Only available in Grafana v4.3+.
Starting from Grafana v5.1 you can name the time column time in addition to earlier supported time_sec. Usage of time_sec will eventually be deprecated.
Grafana ships with a built-in MySQL data source plugin that allow you to query any visualize data from a MySQL compatible database.
Adding the data source
- Open the side menu by clicking the Grafana icon in the top header.
- In the side menu under the
Dashboardslink you should find a link named
- Click the
+ Add data sourcebutton in the top header.
- Select MySQL from the Type dropdown.
Data source options
|Name||The data source name. This is how you refer to the data source in panels and queries.|
|Default||Default data source means that it will be pre-selected for new panels.|
|Host||The IP address/hostname and optional port of your MySQL instance.|
|Database||Name of your MySQL database.|
|User||Database user’s login/username|
|Password||Database user’s password|
|Max open||The maximum number of open connections to the database, default
|Max idle||The maximum number of connections in the idle connection pool, default
|Max lifetime||The maximum amount of time in seconds a connection may be reused, default
Min time interval
A lower limit for the $__interval and $__interval_ms variables.
Recommended to be set to write frequency, for example
1m if your data is written every minute.
This option can also be overridden/configured in a dashboard panel under data source options. It’s important to note that this value needs to be formatted as a
number followed by a valid time identifier, e.g.
1m (1 minute) or
30s (30 seconds). The following time identifiers are supported:
Database User Permissions (Important!)
The database user you specify when you add the data source should only be granted SELECT permissions on
the specified database and tables you want to query. Grafana does not validate that the query is safe. The query
could include any SQL statement. For example, statements like
USE otherdb; and
DROP TABLE user; would be
executed. To protect against this we Highly recommend you create a specific mysql user with restricted permissions.
CREATE USER 'grafanaReader' IDENTIFIED BY 'password'; GRANT SELECT ON mydatabase.mytable TO 'grafanaReader';
You can use wildcards (
*) in place of database or table if you want to grant access to more databases and tables.
Only available in Grafana v5.4+.
You find the MySQL query editor in the metrics tab in a panel’s edit mode. You enter edit mode by clicking the panel title, then edit.
The query editor has a link named
Generated SQL that shows up after a query has been executed, while in panel edit mode. Click on it and it will expand and show the raw interpolated SQL string that was executed.
Select table, time column and metric column (FROM)
When you enter edit mode for the first time or add a new query Grafana will try to prefill the query builder with the first table that has a timestamp column and a numeric column.
In the FROM field, Grafana will suggest tables that are in the configured database. To select a table or view in another database that your database user has access to you can manually enter a fully qualified name (database.table) like
The Time column field refers to the name of the column holding your time values. Selecting a value for the Metric column field is optional. If a value is selected, the Metric column field will be used as the series name.
The metric column suggestions will only contain columns with a text datatype (text, tinytext, mediumtext, longtext, varchar, char).
If you want to use a column with a different datatype as metric column you may enter the column name with a cast:
CAST(numericColumn as CHAR).
You may also enter arbitrary SQL expressions in the metric column field that evaluate to a text datatype like
CONCAT(column1, " ", CAST(numericColumn as CHAR)).
Columns and Aggregation functions (SELECT)
SELECT row you can specify what columns and functions you want to use.
In the column field you may write arbitrary expressions instead of a column name like
column1 * column2 / column3.
If you use aggregate functions you need to group your resultset. The editor will automatically add a
GROUP BY time if you add an aggregate function.
You may add further value columns by clicking the plus button and selecting
Column from the menu. Multiple value columns will be plotted as separate series in the graph panel.
Filter data (WHERE)
To add a filter click the plus icon to the right of the
WHERE condition. You can remove filters by clicking on
the filter and selecting
Remove. A filter for the current selected timerange is automatically added to new queries.
To group by time or any other columns click the plus icon at the end of the GROUP BY row. The suggestion dropdown will only show text columns of your currently selected table but you may manually enter any column.
You can remove the group by clicking on the item and then selecting
If you add any grouping, all selected columns need to have an aggregate function applied. The query builder will automatically add aggregate functions to all columns without aggregate functions when you add groupings.
Grafana can fill in missing values when you group by time. The time function accepts two arguments. The first argument is the time window that you would like to group by, and the second argument is the value you want Grafana to fill missing items with.
Text Editor Mode (RAW)
You can switch to the raw query editor mode by clicking the hamburger icon and selecting
Switch editor mode or by clicking
Edit SQL below the query.
If you use the raw query editor, be sure your query at minimum has
ORDER BY timeand a filter on the returned time range.
To simplify syntax and to allow for dynamic parts, like date range filters, the query can contain macros.
|$__time(dateColumn)||Will be replaced by an expression to convert to a UNIX timestamp and rename the column to
|$__timeEpoch(dateColumn)||Will be replaced by an expression to convert to a UNIX timestamp and rename the column to
|$__timeFilter(dateColumn)||Will be replaced by a time range filter using the specified column name. For example, dateColumn BETWEEN FROM_UNIXTIME(1494410783) AND FROM_UNIXTIME(1494410983)|
|$__timeFrom()||Will be replaced by the start of the currently active time selection. For example, FROM_UNIXTIME(1494410783)|
|$__timeTo()||Will be replaced by the end of the currently active time selection. For example, FROM_UNIXTIME(1494410983)|
|$__timeGroup(dateColumn,‘5m’)||Will be replaced by an expression usable in GROUP BY clause. For example, *cast(cast(UNIX_TIMESTAMP(dateColumn)/(300) as signed)300 as signed),|
|$__timeGroup(dateColumn,‘5m’, 0)||Same as above but with a fill parameter so missing points in that series will be added by grafana and 0 will be used as value.|
|$__timeGroup(dateColumn,‘5m’, NULL)||Same as above but NULL will be used as value for missing points.|
|$__timeGroup(dateColumn,‘5m’, previous)||Same as above but the previous value in that series will be used as fill value if no value has been seen yet NULL will be used (only available in Grafana 5.3+).|
|$__timeGroupAlias(dateColumn,‘5m’)||Will be replaced identical to $__timeGroup but with an added column alias (only available in Grafana 5.3+).|
|$__unixEpochFilter(dateColumn)||Will be replaced by a time range filter using the specified column name with times represented as Unix timestamp. For example, dateColumn > 1494410783 AND dateColumn < 1494497183|
|$__unixEpochFrom()||Will be replaced by the start of the currently active time selection as Unix timestamp. For example, 1494410783|
|$__unixEpochTo()||Will be replaced by the end of the currently active time selection as Unix timestamp. For example, 1494497183|
|$__unixEpochNanoFilter(dateColumn)||Will be replaced by a time range filter using the specified column name with times represented as nanosecond timestamp. For example, dateColumn > 1494410783152415214 AND dateColumn < 1494497183142514872|
|$__unixEpochNanoFrom()||Will be replaced by the start of the currently active time selection as nanosecond timestamp. For example, 1494410783152415214|
|$__unixEpochNanoTo()||Will be replaced by the end of the currently active time selection as nanosecond timestamp. For example, 1494497183142514872|
|$__unixEpochGroup(dateColumn,‘5m’, [fillmode])||Same as $__timeGroup but for times stored as Unix timestamp (only available in Grafana 5.3+).|
|$__unixEpochGroupAlias(dateColumn,‘5m’, [fillmode])||Same as above but also adds a column alias (only available in Grafana 5.3+).|
We plan to add many more macros. If you have suggestions for what macros you would like to see, please open an issue in our GitHub repo.
The query editor has a link named
Generated SQL that show up after a query as been executed, while in panel edit mode. Click on it and it will expand and show the raw interpolated SQL string that was executed.
Format as query option is set to
Table then you can basically do any type of SQL query. The table panel will automatically show the results of whatever columns and rows your query returns.
Query editor with example query:
SELECT title as 'Title', user.login as 'Created By' , dashboard.created as 'Created On' FROM dashboard INNER JOIN user on user.id = dashboard.created_by WHERE $__timeFilter(dashboard.created)
You can control the name of the Table panel columns by using regular
as SQL column selection syntax.
The resulting table panel:
Time series queries
If you set
Format as to
Time series, for use in Graph panel for example, then the query must return a column named
time that returns either a SQL datetime or any numeric datatype representing Unix epoch.
Any column except
metric is treated as a value column.
You may return a column named
metric that is used as metric name for the value column.
If you return multiple value columns and a column named
metric then this column is used as prefix for the series name (only available in Grafana 5.3+).
Resultsets of time series queries need to be sorted by time.
SELECT $__timeGroup(time_date_time,'5m'), min(value_double), 'min' as metric FROM test_data WHERE $__timeFilter(time_date_time) GROUP BY time ORDER BY time
Example using the fill parameter in the $__timeGroup macro to convert null values to be zero instead:
SELECT $__timeGroup(createdAt,'5m',0), sum(value_double) as value, measurement FROM test_data WHERE $__timeFilter(createdAt) GROUP BY time, measurement ORDER BY time
Example with multiple columns:
SELECT $__timeGroup(time_date_time,'5m'), min(value_double) as min_value, max(value_double) as max_value FROM test_data WHERE $__timeFilter(time_date_time) GROUP BY time ORDER BY time
Currently, there is no support for a dynamic group by time based on time range and panel width. This is something we plan to add.
This feature is currently available in the nightly builds and will be included in the 5.0.0 release.
Instead of hard-coding things like server, application and sensor name in you metric queries you can use variables in their place. Variables are shown as dropdown select boxes at the top of the dashboard. These dropdowns makes it easy to change the data being displayed in your dashboard.
Check out the Templating documentation for an introduction to the templating feature and the different types of template variables.
If you add a template variable of the type
Query, you can write a MySQL query that can
return things like measurement names, key names or key values that are shown as a dropdown select box.
For example, you can have a variable that contains all values for the
hostname column in a table if you specify a query like this in the templating variable Query setting.
SELECT hostname FROM my_host
A query can returns multiple columns and Grafana will automatically create a list from them. For example, the query below will return a list with values from
SELECT my_host.hostname, my_other_host.hostname2 FROM my_host JOIN my_other_host ON my_host.city = my_other_host.city
To use time range dependent macros like
$__timeFilter(column) in your query the refresh mode of the template variable needs to be set to On Time Range Change.
SELECT event_name FROM event_log WHERE $__timeFilter(time_column)
Another option is a query that can create a key/value variable. The query should return two columns that are named
__text column value should be unique (if it is not unique then the first value is used). The options in the dropdown will have a text and value that allows you to have a friendly name as text and an id as the value. An example query with
hostname as the text and
id as the value:
SELECT hostname AS __text, id AS __value FROM my_host
You can also create nested variables. For example if you had another variable named
region. Then you could have
the hosts variable only show hosts from the current selected region with a query like this (if
region is a multi-value variable then use the
IN comparison operator rather than
= to match against multiple values):
SELECT hostname FROM my_host WHERE region IN($region)
__searchFilter to filter results in Query Variable
Available from Grafana 6.5 and above
__searchFilter in the query field will filter the query result based on what the user types in the dropdown select box.
When nothing has been entered by the user the default value for
Important that you surround the
__searchFilterexpression with quotes as Grafana does not do this for you.
The example below shows how to use
__searchFilter as part of the query field to enable searching for
hostname while the user types in the dropdown select box.
SELECT hostname FROM my_host WHERE hostname LIKE '$__searchFilter'
Using Variables in Queries
From Grafana 4.3.0 to 4.6.0, template variables are always quoted automatically so if it is a string value do not wrap them in quotes in where clauses.
From Grafana 4.7.0, template variable values are only quoted when the template variable is a
If the variable is a multi-value variable then use the
IN comparison operator rather than
= to match against multiple values.
There are two syntaxes:
$<varname> Example with a template variable named
SELECT UNIX_TIMESTAMP(atimestamp) as time, aint as value, avarchar as metric FROM my_table WHERE $__timeFilter(atimestamp) and hostname in($hostname) ORDER BY atimestamp ASC
[[varname]] Example with a template variable named
SELECT UNIX_TIMESTAMP(atimestamp) as time, aint as value, avarchar as metric FROM my_table WHERE $__timeFilter(atimestamp) and hostname in([[hostname]]) ORDER BY atimestamp ASC
Disabling Quoting for Multi-value Variables
Grafana automatically creates a quoted, comma-separated string for multi-value variables. For example: if
server02 are selected then it will be formatted as:
'server01', 'server02'. Do disable quoting, use the csv formatting option for variables:
Read more about variable formatting options in the Variables documentation.
Annotations allow you to overlay rich event information on top of graphs. You add annotation queries via the Dashboard menu / Annotations view.
Example query using time column with epoch values:
SELECT epoch_time as time, metric1 as text, CONCAT(tag1, ',', tag2) as tags FROM public.test_data WHERE $__unixEpochFilter(epoch_time)
Example query using time column of native SQL date/time data type:
SELECT native_date_time as time, metric1 as text, CONCAT(tag1, ',', tag2) as tags FROM public.test_data WHERE $__timeFilter(native_date_time)
|time||The name of the date/time field. Could be a column with a native SQL date/time data type or epoch value.|
|timeend||Optional name of the end date/time field. Could be a column with a native SQL date/time data type or epoch value.|
|text||Event description field.|
|tags||Optional field name to use for event tags as a comma separated string.|
Time series queries should work in alerting conditions. Table formatted queries is not yet supported in alert rule conditions.
Configure the data source with provisioning
It’s now possible to configure data sources using config files with Grafana’s provisioning system. You can read more about how it works and all the settings you can set for data sources on the provisioning docs page
Here are some provisioning examples for this data source.
apiVersion: 1 datasources: - name: MySQL type: mysql url: localhost:3306 database: grafana user: grafana password: password jsonData: maxOpenConns: 0 # Grafana v5.4+ maxIdleConns: 2 # Grafana v5.4+ connMaxLifetime: 14400 # Grafana v5.4+