Menu
Open source

otelcol.receiver.otlp

otelcol.receiver.otlp accepts OTLP-formatted data over the network and forwards it to other otelcol.* components.

NOTE: otelcol.receiver.otlp is a wrapper over the upstream OpenTelemetry Collector otlp receiver. Bug reports or feature requests will be redirected to the upstream repository, if necessary.

Multiple otelcol.receiver.otlp components can be specified by giving them different labels.

Usage

river
otelcol.receiver.otlp "LABEL" {
  grpc { ... }
  http { ... }

  output {
    metrics = [...]
    logs    = [...]
    traces  = [...]
  }
}

Arguments

otelcol.receiver.otlp doesn’t support any arguments and is configured fully through inner blocks.

Blocks

The following blocks are supported inside the definition of otelcol.receiver.otlp:

HierarchyBlockDescriptionRequired
grpcgrpcConfigures the gRPC server to receive telemetry data.no
grpc > tlstlsConfigures TLS for the gRPC server.no
grpc > keepalivekeepaliveConfigures keepalive settings for the configured server.no
grpc > keepalive > server_parametersserver_parametersServer parameters used to configure keepalive settings.no
grpc > keepalive > enforcement_policyenforcement_policyEnforcement policy for keepalive settings.no
httphttpConfigures the HTTP server to receive telemetry data.no
http > tlstlsConfigures TLS for the HTTP server.no
http > corscorsConfigures CORS for the HTTP server.no
debug_metricsdebug_metricsConfigures the metrics that this component generates to monitor its state.no
outputoutputConfigures where to send received telemetry data.yes

The > symbol indicates deeper levels of nesting. For example, grpc > tls refers to a tls block defined inside a grpc block.

grpc block

The grpc block configures the gRPC server used by the component. If the grpc block isn’t provided, a gRPC server isn’t started.

The following arguments are supported:

NameTypeDescriptionDefaultRequired
endpointstringhost:port to listen for traffic on."0.0.0.0:4317"no
transportstringTransport to use for the gRPC server."tcp"no
max_recv_msg_sizestringMaximum size of messages the server will accept. 0 disables a limit.no
max_concurrent_streamsnumberLimit the number of concurrent streaming RPC calls.no
read_buffer_sizestringSize of the read buffer the gRPC server will use for reading from clients."512KiB"no
write_buffer_sizestringSize of the write buffer the gRPC server will use for writing to clients.no
include_metadatabooleanPropagate incoming connection metadata to downstream consumers.no

tls block

The tls block configures TLS settings used for a server. If the tls block isn’t provided, TLS won’t be used for connections to the server.

The following arguments are supported:

NameTypeDescriptionDefaultRequired
ca_filestringPath to the CA file.no
cert_filestringPath to the TLS certificate.no
key_filestringPath to the TLS certificate key.no
min_versionstringMinimum acceptable TLS version for connections."TLS 1.2"no
max_versionstringMaximum acceptable TLS version for connections."TLS 1.3"no
reload_intervaldurationFrequency to reload the certificates.no
client_ca_filestringPath to the CA file used to authenticate client certificates.no

keepalive block

The keepalive block configures keepalive settings for connections to a gRPC server.

keepalive doesn’t support any arguments and is configured fully through inner blocks.

server_parameters block

The server_parameters block controls keepalive and maximum age settings for gRPC servers.

The following arguments are supported:

NameTypeDescriptionDefaultRequired
max_connection_idledurationMaximum age for idle connections."infinity"no
max_connection_agedurationMaximum age for non-idle connections."infinity"no
max_connection_age_gracedurationTime to wait before forcibly closing connections."infinity"no
timedurationHow often to ping inactive clients to check for liveness."2h"no
timeoutdurationTime to wait before closing inactive clients that do not respond to liveness checks."20s"no

enforcement_policy block

The enforcement_policy block configures the keepalive enforcement policy for gRPC servers. The server will close connections from clients that violate the configured policy.

The following arguments are supported:

NameTypeDescriptionDefaultRequired
min_timedurationMinimum time clients should wait before sending a keepalive ping."5m"no
permit_without_streambooleanAllow clients to send keepalive pings when there are no active streams.falseno

http block

The http block configures the HTTP server used by the component. If the http block isn’t specified, an HTTP server isn’t started.

The following arguments are supported:

NameTypeDescriptionDefaultRequired
endpointstringhost:port to listen for traffic on."0.0.0.0:4318"no
max_request_body_sizestringMaximum request body size the server will allow. No limit when unset.no
include_metadatabooleanPropagate incoming connection metadata to downstream consumers.no
traces_url_pathstringThe URL path to receive traces on."/v1/traces"no
metrics_url_pathstringThe URL path to receive metrics on."/v1/metrics"no
logs_url_pathstringThe URL path to receive logs on."/v1/logs"no

To send telemetry signals to otelcol.receiver.otlp with HTTP/JSON, POST to:

  • [endpoint][traces_url_path] for traces.
  • [endpoint][metrics_url_path] for metrics.
  • [endpoint][logs_url_path] for logs.

cors block

The cors block configures CORS settings for an HTTP server.

The following arguments are supported:

NameTypeDescriptionDefaultRequired
allowed_originslist(string)Allowed values for the Origin header.no
allowed_headerslist(string)Accepted headers from CORS requests.["X-Requested-With"]no
max_agenumberConfigures the Access-Control-Max-Age response header.no

The allowed_headers argument specifies which headers are acceptable from a CORS request. The following headers are always implicitly allowed:

  • Accept
  • Accept-Language
  • Content-Type
  • Content-Language

If allowed_headers includes "*", all headers are permitted.

debug_metrics block

The debug_metrics block configures the metrics that this component generates to monitor its state.

The following arguments are supported:

NameTypeDescriptionDefaultRequired
disable_high_cardinality_metricsbooleanWhether to disable certain high cardinality metrics.trueno

disable_high_cardinality_metrics is the Grafana Agent equivalent to the telemetry.disableHighCardinalityMetrics feature gate in the OpenTelemetry Collector. It removes attributes that could cause high cardinality metrics. For example, attributes with IP addresses and port numbers in metrics about HTTP and gRPC connections are removed.

output block

The output block configures a set of components to forward resulting telemetry data to.

The following arguments are supported:

NameTypeDescriptionDefaultRequired
logslist(otelcol.Consumer)List of consumers to send logs to.[]no
metricslist(otelcol.Consumer)List of consumers to send metrics to.[]no
traceslist(otelcol.Consumer)List of consumers to send traces to.[]no

You must specify the output block, but all its arguments are optional. By default, telemetry data is dropped. Configure the metrics, logs, and traces arguments accordingly to send telemetry data to other components.

Exported fields

otelcol.receiver.otlp does not export any fields.

Component health

otelcol.receiver.otlp is only reported as unhealthy if given an invalid configuration.

Debug information

otelcol.receiver.otlp does not expose any component-specific debug information.

Debug metrics

  • receiver_accepted_spans_ratio_total (counter): Number of spans successfully pushed into the pipeline.
  • receiver_refused_spans_ratio_total (counter): Number of spans that could not be pushed into the pipeline.
  • rpc_server_duration_milliseconds (histogram): Duration of RPC requests from a gRPC server.

Example

This example forwards received telemetry data through a batch processor before finally sending it to an OTLP-capable endpoint:

river
otelcol.receiver.otlp "default" {
  http {}
  grpc {}

  output {
    metrics = [otelcol.processor.batch.default.input]
    logs    = [otelcol.processor.batch.default.input]
    traces  = [otelcol.processor.batch.default.input]
  }
}

otelcol.processor.batch "default" {
  output {
    metrics = [otelcol.exporter.otlp.default.input]
    logs    = [otelcol.exporter.otlp.default.input]
    traces  = [otelcol.exporter.otlp.default.input]
  }
}

otelcol.exporter.otlp "default" {
  client {
    endpoint = env("OTLP_ENDPOINT")
  }
}

Technical details

otelcol.receiver.otlp supports gzip for compression.

Compatible components

otelcol.receiver.otlp can accept arguments from the following components:

Note

Connecting some components may not be sensible or components may require further configuration to make the connection work correctly. Refer to the linked documentation for more details.