--- title: "otelcol.receiver.jaeger | Grafana Agent documentation" description: "Learn about otelcol.receiver.jaeger" --- # otelcol.receiver.jaeger `otelcol.receiver.jaeger` accepts Jaeger-formatted data over the network and forwards it to other `otelcol.*` components. > **NOTE**: `otelcol.receiver.jaeger` is a wrapper over the upstream OpenTelemetry Collector `jaeger` receiver. Bug reports or feature requests will be redirected to the upstream repository, if necessary. Multiple `otelcol.receiver.jaeger` components can be specified by giving them different labels. ## Usage Alloy ![Copy code to clipboard](/media/images/icons/icon-copy-small-2.svg) Copy ```alloy otelcol.receiver.jaeger "LABEL" { protocols { grpc {} thrift_http {} thrift_binary {} thrift_compact {} } output { metrics = [...] logs = [...] traces = [...] } } ``` ## Arguments `otelcol.receiver.jaeger` doesn’t support any arguments and is configured fully through inner blocks. ## Blocks The following blocks are supported inside the definition of `otelcol.receiver.jaeger`: Expand table | Hierarchy | Block | Description | Required | |-------------------------------------------------------------|--------------------------------------------------|----------------------------------------------------------------------------|----------| | protocols | [protocols](#protocols-block) | Configures the protocols the component can accept traffic over. | yes | | protocols > grpc | [grpc](#grpc-block) | Configures a Jaeger gRPC server to receive traces. | no | | protocols > grpc > tls | [tls](#tls-block) | Configures TLS for the gRPC server. | no | | protocols > grpc > keepalive | [keepalive](#keepalive-block) | Configures keepalive settings for the configured server. | no | | protocols > grpc > keepalive > server\_parameters | [server\_parameters](#server_parameters-block) | Server parameters used to configure keepalive settings. | no | | protocols > grpc > keepalive > enforcement\_policy | [enforcement\_policy](#enforcement_policy-block) | Enforcement policy for keepalive settings. | no | | protocols > thrift\_http | [thrift\_http](#thrift_http-block) | Configures a Thrift HTTP server to receive traces. | no | | protocols > thrift\_http > tls | [tls](#tls-block) | Configures TLS for the Thrift HTTP server. | no | | protocols > thrift\_http > cors | [cors](#cors-block) | Configures CORS for the Thrift HTTP server. | no | | protocols > thrift\_binary | [thrift\_binary](#thrift_binary-block) | Configures a Thrift binary UDP server to receive traces. | no | | protocols > thrift\_compact | [thrift\_compact](#thrift_compact-block) | Configures a Thrift compact UDP server to receive traces. | no | | debug\_metrics | [debug\_metrics](#debug_metrics-block) | Configures the metrics that this component generates to monitor its state. | no | | output | [output](#output-block) | Configures where to send received telemetry data. | yes | The `>` symbol indicates deeper levels of nesting. For example, `protocols > grpc` refers to a `grpc` block defined inside a `protocols` block. ### protocols block The `protocols` block defines a set of protocols that will be used to accept traces over the network. `protocols` doesn’t support any arguments and is configured fully through inner blocks. `otelcol.receiver.jeager` requires at least one protocol block (`grpc`, `thrift_http`, `thrift_binary`, or `thrift_compact`) to be provided. ### grpc block The `grpc` block configures a gRPC server which can accept Jaeger traces. If the `grpc` block isn’t provided, a gRPC server isn’t started. The following arguments are supported: Expand table | Name | Type | Description | Default | Required | |--------------------------|-----------|----------------------------------------------------------------------------|-------------------|----------| | `endpoint` | `string` | `host:port` to listen for traffic on. | `"0.0.0.0:14250"` | no | | `transport` | `string` | Transport to use for the gRPC server. | `"tcp"` | no | | `max_recv_msg_size` | `string` | Maximum size of messages the server will accept. 0 disables a limit. | | no | | `max_concurrent_streams` | `number` | Limit the number of concurrent streaming RPC calls. | | no | | `read_buffer_size` | `string` | Size of the read buffer the gRPC server will use for reading from clients. | `"512KiB"` | no | | `write_buffer_size` | `string` | Size of the write buffer the gRPC server will use for writing to clients. | | no | | `include_metadata` | `boolean` | Propagate incoming connection metadata to downstream consumers. | | no | ### tls block The `tls` block configures TLS settings used for a server. If the `tls` block isn’t provided, TLS won’t be used for connections to the server. The following arguments are supported: Expand table | Name | Type | Description | Default | Required | |--------------------------------|----------------|----------------------------------------------------------------------------------------------|-------------|----------| | `ca_file` | `string` | Path to the CA file. | | no | | `ca_pem` | `string` | CA PEM-encoded text to validate the server with. | | no | | `cert_file` | `string` | Path to the TLS certificate. | | no | | `cert_pem` | `string` | Certificate PEM-encoded text for client authentication. | | no | | `insecure_skip_verify` | `boolean` | Ignores insecure server TLS certificates. | | no | | `include_system_ca_certs_pool` | `boolean` | Whether to load the system certificate authorities pool alongside the certificate authority. | `false` | no | | `insecure` | `boolean` | Disables TLS when connecting to the configured server. | | no | | `key_file` | `string` | Path to the TLS certificate key. | | no | | `key_pem` | `secret` | Key PEM-encoded text for client authentication. | | no | | `max_version` | `string` | Maximum acceptable TLS version for connections. | `"TLS 1.3"` | no | | `min_version` | `string` | Minimum acceptable TLS version for connections. | `"TLS 1.2"` | no | | `cipher_suites` | `list(string)` | A list of TLS cipher suites that the TLS transport can use. | `[]` | no | | `reload_interval` | `duration` | The duration after which the certificate is reloaded. | `"0s"` | no | | `server_name` | `string` | Verifies the hostname of server certificates when set. | | no | If the server doesn’t support TLS, you must set the `insecure` argument to `true`. To disable `tls` for connections to the server, set the `insecure` argument to `true`. If `reload_interval` is set to `"0s"`, the certificate never reloaded. The following pairs of arguments are mutually exclusive and can’t both be set simultaneously: - `ca_pem` and `ca_file` - `cert_pem` and `cert_file` - `key_pem` and `key_file` If `cipher_suites` is left blank, a safe default list is used. See the [Go TLS documentation](https://go.dev/src/crypto/tls/cipher_suites.go) for a list of supported cipher suites. ### keepalive block The `keepalive` block configures keepalive settings for connections to a gRPC server. `keepalive` doesn’t support any arguments and is configured fully through inner blocks. ### server\_parameters block The `server_parameters` block controls keepalive and maximum age settings for gRPC servers. The following arguments are supported: Expand table | Name | Type | Description | Default | Required | |----------------------------|------------|--------------------------------------------------------------------------------------|--------------|----------| | `max_connection_idle` | `duration` | Maximum age for idle connections. | `"infinity"` | no | | `max_connection_age` | `duration` | Maximum age for non-idle connections. | `"infinity"` | no | | `max_connection_age_grace` | `duration` | Time to wait before forcibly closing connections. | `"infinity"` | no | | `time` | `duration` | How often to ping inactive clients to check for liveness. | `"2h"` | no | | `timeout` | `duration` | Time to wait before closing inactive clients that do not respond to liveness checks. | `"20s"` | no | ### enforcement\_policy block The `enforcement_policy` block configures the keepalive enforcement policy for gRPC servers. The server will close connections from clients that violate the configured policy. The following arguments are supported: Expand table | Name | Type | Description | Default | Required | |-------------------------|------------|-------------------------------------------------------------------------|---------|----------| | `min_time` | `duration` | Minimum time clients should wait before sending a keepalive ping. | `"5m"` | no | | `permit_without_stream` | `boolean` | Allow clients to send keepalive pings when there are no active streams. | `false` | no | ### thrift\_http block The `thrift_http` block configures an HTTP server which can accept Thrift-formatted traces. If the `thrift_http` block isn’t specified, an HTTP server isn’t started. The following arguments are supported: Expand table | Name | Type | Description | Default | Required | |-------------------------|-----------|-----------------------------------------------------------------|-------------------|----------| | `endpoint` | `string` | `host:port` to listen for traffic on. | `"0.0.0.0:14268"` | no | | `max_request_body_size` | `string` | Maximum request body size the server will allow. | `20MiB` | no | | `include_metadata` | `boolean` | Propagate incoming connection metadata to downstream consumers. | | no | ### cors block The `cors` block configures CORS settings for an HTTP server. The following arguments are supported: Expand table | Name | Type | Description | Default | Required | |-------------------|----------------|----------------------------------------------------------|------------------------|----------| | `allowed_origins` | `list(string)` | Allowed values for the `Origin` header. | | no | | `allowed_headers` | `list(string)` | Accepted headers from CORS requests. | `["X-Requested-With"]` | no | | `max_age` | `number` | Configures the `Access-Control-Max-Age` response header. | | no | The `allowed_headers` specifies which headers are acceptable from a CORS request. The following headers are always implicitly allowed: - `Accept` - `Accept-Language` - `Content-Type` - `Content-Language` If `allowed_headers` includes `"*"`, all headers will be permitted. ### thrift\_binary block The `thrift_binary` block configures a UDP server which can accept traces formatted to the Thrift binary protocol. If the `thrift_binary` block isn’t provided, a UDP server isn’t started. The following arguments are supported: Expand table | Name | Type | Description | Default | Required | |----------------------|----------|----------------------------------------------------------------|------------------|----------| | `endpoint` | `string` | `host:port` to listen for traffic on. | `"0.0.0.0:6832"` | no | | `queue_size` | `number` | Maximum number of UDP messages that can be queued at once. | `1000` | no | | `max_packet_size` | `string` | Maximum UDP message size. | `"65KiB"` | no | | `workers` | `number` | Number of workers to concurrently read from the message queue. | `10` | no | | `socket_buffer_size` | `string` | Buffer to allocate for the UDP socket. | | no | ### thrift\_compact block The `thrift_compact` block configures a UDP server which can accept traces formatted to the Thrift compact protocol. If the `thrift_compact` block isn’t provided, a UDP server isn’t started. The following arguments are supported: Expand table | Name | Type | Description | Default | Required | |----------------------|----------|----------------------------------------------------------------|------------------|----------| | `endpoint` | `string` | `host:port` to listen for traffic on. | `"0.0.0.0:6831"` | no | | `queue_size` | `number` | Maximum number of UDP messages that can be queued at once. | `1000` | no | | `max_packet_size` | `string` | Maximum UDP message size. | `"65KiB"` | no | | `workers` | `number` | Number of workers to concurrently read from the message queue. | `10` | no | | `socket_buffer_size` | `string` | Buffer to allocate for the UDP socket. | | no | ### debug\_metrics block The `debug_metrics` block configures the metrics that this component generates to monitor its state. The following arguments are supported: Expand table | Name | Type | Description | Default | Required | |------------------------------------|-----------|------------------------------------------------------|---------|----------| | `disable_high_cardinality_metrics` | `boolean` | Whether to disable certain high cardinality metrics. | `true` | no | `disable_high_cardinality_metrics` is the Grafana Agent equivalent to the `telemetry.disableHighCardinalityMetrics` feature gate in the OpenTelemetry Collector. It removes attributes that could cause high cardinality metrics. For example, attributes with IP addresses and port numbers in metrics about HTTP and gRPC connections are removed. ### output block The `output` block configures a set of components to forward resulting telemetry data to. The following arguments are supported: Expand table | Name | Type | Description | Default | Required | |-----------|--------------------------|---------------------------------------|---------|----------| | `logs` | `list(otelcol.Consumer)` | List of consumers to send logs to. | `[]` | no | | `metrics` | `list(otelcol.Consumer)` | List of consumers to send metrics to. | `[]` | no | | `traces` | `list(otelcol.Consumer)` | List of consumers to send traces to. | `[]` | no | You must specify the `output` block, but all its arguments are optional. By default, telemetry data is dropped. Configure the `metrics`, `logs`, and `traces` arguments accordingly to send telemetry data to other components. ## Exported fields `otelcol.receiver.jaeger` does not export any fields. ## Component health `otelcol.receiver.jaeger` is only reported as unhealthy if given an invalid configuration. ## Debug information `otelcol.receiver.jaeger` does not expose any component-specific debug information. ## Example This example creates a pipeline which accepts Jaeger-formatted traces and writes them to an OTLP server: Alloy ![Copy code to clipboard](/media/images/icons/icon-copy-small-2.svg) Copy ```alloy otelcol.receiver.jaeger "default" { protocols { grpc {} thrift_http {} thrift_binary {} thrift_compact {} } output { traces = [otelcol.processor.batch.default.input] } } otelcol.processor.batch "default" { output { traces = [otelcol.exporter.otlp.default.input] } } otelcol.exporter.otlp "default" { client { endpoint = "my-otlp-server:4317" } } ``` ## Technical details `otelcol.receiver.jaeger` supports [gzip](https://en.wikipedia.org/wiki/Gzip) for compression. ## Compatible components `otelcol.receiver.jaeger` can accept arguments from the following components: - Components that export [OpenTelemetry `otelcol.Consumer`](../../compatibility/#opentelemetry-otelcolconsumer-exporters) > Note > > Connecting some components may not be sensible or components may require further configuration to make the connection work correctly. Refer to the linked documentation for more details.